Simulate Proficy&MicroLogix via DF1

dogyi

Member
D
Join Date
Apr 2010
Location
Australia
Posts
11
Hi All,

I have an existing system, which is under the following configuration.
Proficy 8.5 for GE QP View
Rslogix 500 for Micrologix 1400
Physically, they are talking to each other via DF1

But with both codes, How can I simulate the runtime via Rslogix500 Emulate?
My system is Win7.

Please share your thoughts.

Many thanks
Chao
 

Similar Topics

S
Simulate/Force Analog Inputs with Emerson RX3i PACSystems?
Hi there, I'm doing some extensive testing and commissioning with a slew of new Emerson PACSystems RX3i PLCs. It would be convenient to...
Replies
5
Views
107
Steve Bailey
Steve Bailey
M
S7-1200 simulate HMI in PC connected to PLC
Hello, I have a small application with a S7-1200 CPU 1212 and a KTP400 Basic HMI. When i am connected to the PLC with my PC i would like to...
Replies
1
Views
547
JesperMP
JesperMP
H
Simulate server in different hardware PCS7
Hello everyone, i would like to test and run os server in pcs7 v8.2 project without rear PLC.i used plcim on ES and nettoplcsim and adjust the...
Replies
4
Views
1,336
HRagab
H
B
simulate existing plc program in studio 5000
Hi all, Im new to Allen Bradley software, so i was given a existing studio 5000 plc program. i already know how to use emulator and rslinx but as...
Replies
2
Views
1,414
drbitboy
drbitboy
L
[Studio 5000] How to simulate program uploaded from PLC
I want to run a simulation of a program uploaded from a rockwell PLC, but I can't configure the CPU on the emulate to match the actual CPU.
Replies
10
Views
2,256
Le Tri Dung
L
Back
Top Bottom