Sinamics G110 inverters and RS485 protocol

bgtpha

Member
bgtpha
Join Date
Mar 2005
Location
Seville, Spain
Posts
7
We've got to mount a serial comunication between several Sinamics G110 inverters with a RS485-US protocol and I'd like to know if I can give them global orders (e.g. start all engines) as well as local orders (e.g. start engine position #3). Thanks in advance
 

Similar Topics

P
Sinamics G110 auto start
Hi guys. I replace the faulty inverter on the industrial oven. It was wired for automatic start up , jumper between pins 6 and 3. I did the same...
Replies
1
Views
1,815
cjd1965
C
D
Beckhoff => Siemens Sinamics V90 configuration example
Hello sameone have Beckhoff PLC Siemens Sinamics V90 configuration example?
Replies
0
Views
109
deividasn
D
M
Siemens Sinamics G120C fixed speed setpoint
Hello, I use a Siemens Sinamics G120C inverter in combination with a S7-1200 cpu. I use the Main Setpoint with the Providrive option and send...
Replies
8
Views
763
mulderm
M
P
Sinamics S120 migration to TIA
Hello to all, I have a STEP 7 project (v5.6) with S7-400F CPU and Sinamics S120 drives with CU320x2PN (ord. nr. 6SL3 040-1MA01-0Axx). I need to...
Replies
7
Views
966
Pandiani
P
A
Sinamics G120 powering with external source
hi every one is t possible to power the (6SL3244-0BB12-1FA0) CU240E-2 PN unit with an external power supply 24vdc without the need of the power...
Replies
1
Views
569
JRW
JRW
Back
Top Bottom