Good morning forum
I have been trying to convert an old SLC 150 program to a RS Logic 500 program. And I was hoping for some feedback on what I have done so far. (I am still in the learning process) Attached is what I have completed so far. And the first half of the original file. I will post 2nd half separate to large as PDF to do at one time.
The machine is an empty bottle De Palletizer. It is loaded with a pallet of bottles 300-400 per layer 10-13 layers per pallet .They are swept off onto a hoist elevator one layer at a time which lowers them down to an accumulation table. Where they continue on into the filling room.
Thanks for any and all feedback.
Jeff
I have been trying to convert an old SLC 150 program to a RS Logic 500 program. And I was hoping for some feedback on what I have done so far. (I am still in the learning process) Attached is what I have completed so far. And the first half of the original file. I will post 2nd half separate to large as PDF to do at one time.
The machine is an empty bottle De Palletizer. It is loaded with a pallet of bottles 300-400 per layer 10-13 layers per pallet .They are swept off onto a hoist elevator one layer at a time which lowers them down to an accumulation table. Where they continue on into the filling room.
Thanks for any and all feedback.
Jeff