Bitsnbites
Guest
B
Hi,
I would like to know that in a redundant SLC system using BSN modules and SLC 5/05 ethernet processors how will the be the IP addresses for each processor be allocated.
If both processors are sharing the same program file, shall they also have the same IP address in such configurations. If yes, then how wilI these IP effect during switchover.
If the IP addresses are different in each processor, how will it be known in a SCADA like RSView that which PLC is now primary and its IP is different.
regards,
I would like to know that in a redundant SLC system using BSN modules and SLC 5/05 ethernet processors how will the be the IP addresses for each processor be allocated.
If both processors are sharing the same program file, shall they also have the same IP address in such configurations. If yes, then how wilI these IP effect during switchover.
If the IP addresses are different in each processor, how will it be known in a SCADA like RSView that which PLC is now primary and its IP is different.
regards,