Slitter / Winder dc drive

controlled

Lifetime Supporting Member
C
Join Date
Nov 2005
Location
bowmanville
Posts
419
Hello all

I have a customer that has a very basic, low end slitter / winder. The main drum is driven from a Siemens 500V, 50hp DC motor. The existing Siemens Simoreg drive crapped out today.
Does anyone have an recommendations for a replacement drive?

The input to the drive is 480 volt, 3 phase.
 

Similar Topics

T
Arpeco - Tracker / Slitter / Rewinder
Hi everyone does anybody got by chance the electrical drawing of Arpeco - Tracker / Slitter / Rewinder machine? thanks for your help
Replies
0
Views
1,564
tarik1978
T
Christoph
Paper slitter/rewinder Decel to predetermined stop footage
I have an application where I want to decel the slitter/rewinder at a calculated preset and stop at a predetermined footage setpoint. The machine...
Replies
9
Views
3,567
osmanmom
O
E
What are the root cause for vibration in Rolling Slitter line
Hi, I am facing vibration issue in my Cold rolled slitter line & I am not able to find out the root cause behind this problem. Whenever line is...
Replies
5
Views
1,944
eshan3012
E
E
Heavy vibration in slitter line
Hi Frnds, I am facing vibration issue in my slitter line, During running CR sheet vibrate heavily & due to that we are not able to run line more...
Replies
5
Views
2,546
eshan3012
E
E
Loop variation problem in slitter line.
Hi, I am facing loop variation problem in my slitter line, actually problem is when in uncoiler last 20 to 25 % coil remain either from starting...
Replies
0
Views
1,082
eshan3012
E
Back
Top Bottom