controlled
Lifetime Supporting Member
Hello all
I have a customer that has a very basic, low end slitter / winder. The main drum is driven from a Siemens 500V, 50hp DC motor. The existing Siemens Simoreg drive crapped out today.
Does anyone have an recommendations for a replacement drive?
The input to the drive is 480 volt, 3 phase.
I have a customer that has a very basic, low end slitter / winder. The main drum is driven from a Siemens 500V, 50hp DC motor. The existing Siemens Simoreg drive crapped out today.
Does anyone have an recommendations for a replacement drive?
The input to the drive is 480 volt, 3 phase.