hadiahmadi5
Member
i think its better for you to use delta plcs and hmi because they havee good price and are small with professional commands
small machine plc
- Thread starter LEEPE
- Start date
72hdflh
Member
I have been using Automation Direct PLC's for close to ten years now. I have only had one unexplained failure, I suspect some kind of power surge or spike. The only other failures that I have seen were due to my own negligence(underating outputs). I will not use anything else unless I am forced to. Tech support is fantastic and FREE.
Similar Topics
I believe that estimating (well, that is) is the most difficult task in the engineering field. Do any of you have insight to share on some...
- interested
- LIVE PLC Questions And Answers
Hi looking to install a smaller less sophisticated PLC for fountain timing and also one analog pressure sensor which would be used to detect...
...and I agree.
Context: TIA Portal/HMI = KTP1200 (12" screen)
In the attached redacted image, the values in the white boxes are entered by the...
Hi all,
I’m new to programming and want to write a simple routine.
Push start button, turns on sensor.
2 second delay before anymore logic read...
Hi! I'm wondering if PLCs are used for small-scale production.
I've got four machines doing different things with textiles, and I'm exploring the...
