SMC Devicenet Mapping to Omron CJ1W-DRM21

drock

Member
D
Join Date
May 2011
Location
Ontario
Posts
2
Hey All,

Looking for some direction on how to map a SMC EX250-SDN1 SI unit to an Omron CJ1W-DRM21 device net scanner. The manual says that it sends/recieves 4 bytes. Do I need to map the full 4 bytes if the i am only using a couple of valves and no inputs? I am getting a d6 error on the DRM21 and i just can't seem to get the configuration right.

Any Thoughts?
 
Last edited:

Similar Topics

A
1769-SDN and EX250 SMC DeviceNet
This is my first time using DeviceNet.So i have some problems.If somebody know , please help me.I am using 1769-SDN and EX250 SMC .I use RSNetworx...
Replies
1
Views
2,335
Ken Roach
Ken Roach
B
DeviceNet Trouble SMC EX240-SDN2 Module
I am hoping that someone here may be able to help me with a DeviceNet issue I am experiencing. Background: I am working on a retooling project in...
Replies
5
Views
4,724
BW2218
B
K
SMC Flex comm loss Error on Devicenet
hi to All, is there any way to activate 20-COMM-D comm Fault action as Stop(or Fault) ONLY in Auto Mode and inhibit this action (hold last/zero)...
Replies
0
Views
4,210
kamalaitounejjar
K
J
DeviceNet and AB SMC-Flex
Hi guys and gals, I am not very familiar with how AB does their DevieNet communications to the SMC-Flex, so bear with me. I have a bad starter...
Replies
2
Views
4,468
Ken Roach
Ken Roach
T
SMC Flex 150 on the way out?
I need to purchase a few Large soft starters for our plant and we prefer to stay Rockwell. We have purchased SMC Flex 150 in the past and they...
Replies
10
Views
421
Tim Ganz
T
Back
Top Bottom