Stahl ET65 HMI

johnmck66

Member
johnmck66
Join Date
Aug 2007
Location
Manchester
Posts
96
Hi
Has anyone encountered error which is something like "LED data area must be 5 DW away from message area", when trying to set up system configuration.

I have not got the setup to hand at the moment. using WINSYSPlus.

Or any help on this HMI would be appreciated.

It's communicating OK with S7316 CPU via MPI.
__________________
Happy to help - sometimes I need it!



đź““ http://www.johnmck66.co.uk
 

Similar Topics

A
Redundant ControlLogix to Remote Stahl IO Base over EthernetIP
I have a Redundant ControlLogix L61 System running on firmware 16.52. There is an existing ControlNet network for the ControlLogix IO bases but we...
Replies
10
Views
3,140
alexpinna
A
N
Stahl Remote I/O I.S 1+ /AB Control Logix
I am just wondering if anyone has ever used R.STAHL Remote I/O I.S 1+ with Rockwell AB Control-Logix 1756-L71, Due to the difficulty of running...
Replies
5
Views
2,611
cardosocea
C
A
Communication of STAHL MT-40 and S5 PLC
Hi, It seems that our HMI and S5 PLC has problems communicating. The error "H-DB is not available" keeps appearing on the MT-40. I think the...
Replies
0
Views
1,885
applecruncher1
A
Z
Stahl Remote I/O to RSLogix 5000
I currently have a RStahl Ethernet Remote I/O which talks Modibus TCP/IP on our network and would like for it to talk to a 1756-ENBT card...
Replies
2
Views
3,151
zJaybird
Z
E
Stahl Exicom HMI Comm Cable
Hi All, Anyone know what is the cable used to upload the backup HMI program for Stahl Exicom?
Replies
0
Views
1,504
epicnote
E
Back
Top Bottom