Stahl Exicom ET-75 & MODBUS

scottmurphy

Member
S
Join Date
Oct 2004
Posts
363
We have 3 of these units, that we need to talk to via MODBUS. Has anyone used these before? We the manual, but to us, the modbus information is vague, there is not an example as in some of the other devices that I have setup.

These are intrinsically safe units if that helps?



Scott
 

Similar Topics

E
Stahl Exicom HMI Comm Cable
Hi All, Anyone know what is the cable used to upload the backup HMI program for Stahl Exicom?
Replies
0
Views
1,503
epicnote
E
A
Redundant ControlLogix to Remote Stahl IO Base over EthernetIP
I have a Redundant ControlLogix L61 System running on firmware 16.52. There is an existing ControlNet network for the ControlLogix IO bases but we...
Replies
10
Views
3,132
alexpinna
A
N
Stahl Remote I/O I.S 1+ /AB Control Logix
I am just wondering if anyone has ever used R.STAHL Remote I/O I.S 1+ with Rockwell AB Control-Logix 1756-L71, Due to the difficulty of running...
Replies
5
Views
2,611
cardosocea
C
A
Communication of STAHL MT-40 and S5 PLC
Hi, It seems that our HMI and S5 PLC has problems communicating. The error "H-DB is not available" keeps appearing on the MT-40. I think the...
Replies
0
Views
1,884
applecruncher1
A
Z
Stahl Remote I/O to RSLogix 5000
I currently have a RStahl Ethernet Remote I/O which talks Modibus TCP/IP on our network and would like for it to talk to a 1756-ENBT card...
Replies
2
Views
3,151
zJaybird
Z
Back
Top Bottom