Step 7 300 INT to Real Convertion
- Thread starter Hal9000
- Start date
TurpoUrpo
Lifetime Supporting Member
Could u now tell us why you want to ignore the remaining 0,0999? Seems very strange to me atlest.
Last edited:
Similar Topics
Hello everyone
I'm new here and was hoping someone can help me out. I have a pneumatic punching/ bending machine that broke down running on a...
Hi,
I have a 315-2 PN/DP CPU. It was programmed in Step 7 V5.5. Then a colleague programmed it in TIA Portal V13 for a test. Now I want to...
Hi All,
I am new to Siemens, and trying to implement a logic state below.
Have 5 valves to open for certain time in Automatic and Manual. I got...
Dear Experts.
I have one project using HMI Ktp 1500 comfort and S7-300 CPU 315-2DP.
The HMI KTP is using Software TIA porttal for programming, and...
IS it possible to write this on a better way:
L #db_Num2
L 121
==I
JNB _02
CALL "CONT_C" , "DB_reg_igla1"...