Can someone write this code consisely for me in STL?
If ("x amount of time" after rising edge M1.0) and (M1.1 = 0) then (output M1.2)
If ("y amount of time" after falling edge M1.0) and (M1.1 = 1) then (output M1.3)
Thanks for the time saver,
If ("x amount of time" after rising edge M1.0) and (M1.1 = 0) then (output M1.2)
If ("y amount of time" after falling edge M1.0) and (M1.1 = 1) then (output M1.3)
Thanks for the time saver,