JeremyM
Lifetime Supporting Member
There's a reset button behind the SD slot you can hold for some period that does a "Stage 2" reset to factory firmware.
Studio v36 news / rumors?
- Thread starter tlf30
- Start date
tlf30
Lifetime Supporting Member
OP
OK, flashing direct on the controller's ethernet port and not across the backplane got v35 back on it.
Flashing v36 directly on the controller's ethernet port did work.
The lesson here is, DO NOT try to flash v36 across the backplane.
Flashing v36 directly on the controller's ethernet port did work.
The lesson here is, DO NOT try to flash v36 across the backplane.
Similar Topics
Does anyone know about the timeline for ACM support for the Library Designer in v36?
Just wondering since the most recent version of ACM seems...
Just a small rant incase nobody downloaded or noticed yet.... but working on a new project in the latest version so I could test out FT Echo...
Hello, We are now working on a software to collet the configuration of different PLC brands ,using a third software to backup all the simens...
Hello, I have a panelview plus that reads from 4 different PLC's. 2 of these used to be Micrologix PLC's and someone else went and updated them to...
Hello everyone, I'm new here, I hope someone can help me.
I've been trying to install EDS files to my Studio 5000 with the EDS tool installer but...