Hi all,
We have been using an UDT that contains tag-based alarms as an In/Out parameter for an AOI. (V31-V32)
Unfortunately, V33, they have prevented us from doing so. (Tech notes BF26296):angr:
https://rockwellautomation.custhelp.com/app/answers/answer_view/a_id/1129240
I spoke with Rockwell tech, they told me to make 2 identical UDT and use UDT1 without tag-based alarm with the AOI and copy it to UDT2 after.
Seems like a lot of work for something simple.
Do you guys have any ideas or any ways around this?
We are trying to stay away from ALMD blocks.
Thanks,
B
We have been using an UDT that contains tag-based alarms as an In/Out parameter for an AOI. (V31-V32)
Unfortunately, V33, they have prevented us from doing so. (Tech notes BF26296):angr:
https://rockwellautomation.custhelp.com/app/answers/answer_view/a_id/1129240
I spoke with Rockwell tech, they told me to make 2 identical UDT and use UDT1 without tag-based alarm with the AOI and copy it to UDT2 after.
Seems like a lot of work for something simple.
Do you guys have any ideas or any ways around this?
We are trying to stay away from ALMD blocks.
Thanks,
B