TCP / IP Communicatio with CompactLogix L30ER

[jthyge]

Hello

Is there any way to communicate with a CompactLogix L30ER with plain TCP / IP.

Similar with the TCON in Siemens TIA Portal?
I need to communicate with at S7-1200 in TCP / IP. And have a working solution for the Siemens PLC.

 

[AlfredoQuintero]

Would this information be useful for you?


Application technique, EtherNet/IP Socket Interface

https://literature.rockwellautomation.com/idc/groups/literature/documents/at/enet-at002_-en-p.pdf

 

[widelto]

@jthyge: Siemens has an application to communicate a S7 with compact/Controllogix.

https://support.industry.siemens.co...ol-system-(clx-glx-controller)?dti=0&lc=en-AT

 

[Firejo]

https://www.spectrumcontrols.com/products/universal-gateway/
A whole lot simpler than trying to deploy the Rockwell code

 

[Masbeng]

How to connect vb6 winsock with PLC cj2m

 

[Firejo]

How to connect vb6 winsock with PLC cj2m

One, not even close to enough detail in your question, two, you're high jacking someone else's post. You should create a new post for your question.

 

[jthyge]

Hello. Thanks for your answers.

Firejo->Im working on af school project, so cant buy hardware.

I am now trying to crack the "EtherNet/IP Socket Interface".. Not easy.

I have created at working socket, but in my "OpenConnection" MSG i get the error code 16#0005;Class or instance not supported.

I have checked the FW. Its version 32.011, so this should be fine.
The error code description does not help me much.

Pictures:
https://ibb.co/Fg4GHF7
https://ibb.co/fS9Z1Hf

 

[jthyge]

After hours of trying, and trying... It now works with the SIEMENS T_COMM FB.

https://support.industry.siemens.co...ol-system-(clx-glx-controller)?dti=0&lc=en-AT

But there is a fault in the documentation.
With a S7-1200 CPU the InterfaceId is 64, not 1, as written in the documentation.

Thanks for your answers.