Hi guys,
It's me again with another question. I have like three projects going on and I'm going crazy. I have this OMRON E5EN temperature controller that outputs a 4-20ma signal that can be setup to represent the "Process Temperature".
I have a PLC which contains a 1746-NIO4I module that has 2 input nodes available. I want to bring this 4-20ma signal into this module and scaled it to represent the "Process Temperature", so I can do a LOW and MAX limit check and shutdown a process if temperature limits are exceeded.
Can I accomplish this task with what I have at my disposal gentlemen. Also will the "Scale Min" and "Scale Max" on my SCP function equal to the range of operation of the thermocouple connected to this controller.
It's me again with another question. I have like three projects going on and I'm going crazy. I have this OMRON E5EN temperature controller that outputs a 4-20ma signal that can be setup to represent the "Process Temperature".
I have a PLC which contains a 1746-NIO4I module that has 2 input nodes available. I want to bring this 4-20ma signal into this module and scaled it to represent the "Process Temperature", so I can do a LOW and MAX limit check and shutdown a process if temperature limits are exceeded.
Can I accomplish this task with what I have at my disposal gentlemen. Also will the "Scale Min" and "Scale Max" on my SCP function equal to the range of operation of the thermocouple connected to this controller.