JRW
Member
And if recall correctly, he will have to scale this too
I recall it coming in x10
I recall it coming in x10
Thermocouple not Reading in Siemens PLC
- Thread starter Tweeker
- Start date
In the PLC program, create a DB or M tag and MOVE %IWnnnnto that tag.
Create an HMI tag that connects to your new tag.
Worked perfectly! Thank you.
Similar Topics
Hello All,
My name is Austen, and I am working on a project for a plastics extrusion plant that deals with a lot of thermocouples and other...
Hey all,
i have a friend with an application where he has a "black box" which is comprised of a heater and a thermocouple (4 wires coming out in...
I know I can measure mV of a TC (thermocouple) output with my voltmeter at the analog input card terminals. But I cannot get any mV reading when I...
I am working on a home project that I am logging temperatures indoors and outdoors. I am using type J thermocouple going to a 1746-NT4.
I...
I am having an issue getting a IY4 to read my thermocouple correctly. We have a R type and K type hooked up and sitting at a known room...
