Good morning from Aus,
Currently installing a controllogix 5563 into a plant that requires comms to and from a TI 545 (or 555).
Wondering if anyone has had any success with soft comms between the two. Or as I'm thinking... hard comms may be required.
Any help/suggestions greatly appreciated.
Thanks
Currently installing a controllogix 5563 into a plant that requires comms to and from a TI 545 (or 555).
Wondering if anyone has had any success with soft comms between the two. Or as I'm thinking... hard comms may be required.
Any help/suggestions greatly appreciated.
Thanks