Time question in Xinje XC3

[xenoben]

I have a request that I need to program a ventilator that must be start every morning in a particular time.
I have a Xinje xc3 modul for this.

What kind of solution can I use for this problem?

Thanks for the answer

 

[gclshortt]

http://www.imenista.com/pdf/XCPLCV2.51.pdf
Use the [TRD] function or Time Compare [TCMP] to read the real time clock

Regards,

 

[xenoben]

ahhh okay, so according to this if i want to start the fan every morning at 8 my ladder should look like this?
---|X|------------[TRD][D3]---------- ?

 

[the_msp]

I have sample code that I can paste when I get home in around 4 hours.

 

[the_msp]

I retract my time estimate. I had a copy on my pendrive. See rung 1588 as an example.

 

[the_msp]

easier to read, I hope


photo share

 

[xenoben]

oh wow many thanks my friend

 

[the_msp]

You're welcome. Thanks for the link to the manual, Garry. That's better than the half english half chinese one I was using years ago!