I've been thrown to the wolves on a project that was done long before I started. A customer put in a Omron set up and is having trouble syncing the plc clock with the server clock. They are using a CJ1M-CPU11-ETN. Our Omron rep went to the site and changed the settings, but they didn't hold. I'm not experianced with Omron controllers (yet) so I don't know what to look for. I'm just looking for ideas here. I haven't been to the jobsite yet and they haven't gotten me a program to look at. This just came up in the last few days, before I went out of town. Any help or direction is appreciated.