Hello all. I have got some Siemens TI305 PLC's with a 330 CPU. I am attempting to back up the software on them, connecting via D3-232-DCU with a RS232 connection to my PG. I have attempted to use TI Soft 2, V2.01 and V1.01 for series 305 and the Direct soft 6 software also and have so far been unsuccessful. The TI Soft is set up on a windows 2000 and the direct soft on a window 10 machine.
I have tried multiple set ups of the dip switches on the DCU and altered the baud rates on my PG's serial port on Comm1 also which has not worked. I've tried multiple different addresses to no avail also.
I'm not too savvy with the TI equipment so if anyone is your assistance would be greatly appreciated. Thanks.
I have tried multiple set ups of the dip switches on the DCU and altered the baud rates on my PG's serial port on Comm1 also which has not worked. I've tried multiple different addresses to no avail also.
I'm not too savvy with the TI equipment so if anyone is your assistance would be greatly appreciated. Thanks.