mysticarcher
Member
Hi All,
Newbie questions but I have two of them!:
1. I am unable to toggle the bit on I:0 (it keeps at 0). If I go into the data file and manually change it to 1, it quickly reverts back to 0. If I try to Force On, it doesn't start the accumulation of the timer so
https://i.imgur.com/M8jG3GG.png
2. It does not let me add new data files. I also cannot seem to access any other inputs and outputs besides I0 and O0 despite there being 20 inputs and 12 outputs.
https://i.imgur.com/NgVWYRT.png
https://i.imgur.com/bKHvZKi.png
Hardware is AB MicroLogix 1000 and software is RSLogix Micro Starter Lite 8.
Newbie questions but I have two of them!:
1. I am unable to toggle the bit on I:0 (it keeps at 0). If I go into the data file and manually change it to 1, it quickly reverts back to 0. If I try to Force On, it doesn't start the accumulation of the timer so
https://i.imgur.com/M8jG3GG.png
2. It does not let me add new data files. I also cannot seem to access any other inputs and outputs besides I0 and O0 despite there being 20 inputs and 12 outputs.
https://i.imgur.com/NgVWYRT.png
https://i.imgur.com/bKHvZKi.png
Hardware is AB MicroLogix 1000 and software is RSLogix Micro Starter Lite 8.
Last edited: