Ones_Zeros
Member
Hey Guys,
I have a normally closed contact in a PLC
I'm needing to create a button in
Wonderware to toggle this bit on & off
I have a button created but it
Just toggles the bit. I'm needing
It to changed the state of the bit
& hold it in that state until I push
The button again.
So for example:
Hit button#1 = auto (change bit to 0)
Hit button#1 again = manual ( change bit to 1)
I appreciate the help
I have a normally closed contact in a PLC
I'm needing to create a button in
Wonderware to toggle this bit on & off
I have a button created but it
Just toggles the bit. I'm needing
It to changed the state of the bit
& hold it in that state until I push
The button again.
So for example:
Hit button#1 = auto (change bit to 0)
Hit button#1 again = manual ( change bit to 1)
I appreciate the help