Mintycakes
Member
Hi everyone,
I have a project involved with Toyota whereby the customer would like to be able to control devices within a booth using a portable android tablet.
The system is running on Toyota's Toyopuc standard PLC and has an HMI using ScreenWorks, no PC stations.
The tablet being used is a Galaxy Tab Active 3.
I was thinking whether or not its possible to set up a remote connection to the HMI with an application, or browser on the tablet, similarly to WinCC's Sm@rtServer almost.
Basically, the operator, or whoever is using the tablet can open an application, or a webserver and connect to the ScreenWorks HMI remotely to switch on pumps/motors, etc.
Does someone perhaps know of a simple solution to this?
Kind regards,
Mintycakes
I have a project involved with Toyota whereby the customer would like to be able to control devices within a booth using a portable android tablet.
The system is running on Toyota's Toyopuc standard PLC and has an HMI using ScreenWorks, no PC stations.
The tablet being used is a Galaxy Tab Active 3.
I was thinking whether or not its possible to set up a remote connection to the HMI with an application, or browser on the tablet, similarly to WinCC's Sm@rtServer almost.
Basically, the operator, or whoever is using the tablet can open an application, or a webserver and connect to the ScreenWorks HMI remotely to switch on pumps/motors, etc.
Does someone perhaps know of a simple solution to this?
Kind regards,
Mintycakes