novice
Member
I'm looking for trade magazines that are industry-oriented. Any recommendations? Thanks.
Trade rags
- Thread starter novice
- Start date
Tom Jenkins
Lifetime Supporting Member
Control Engineering is quite good. http://www.controleng.com/
brucechase
Member
Be careful what you wish for!
Be careful what you wish for! Once you start these, you will get many others, even if you don't want them (I get about 4 per week). I also get calls weekly from someone wanting to verify my information to send me a free magazine. I tell them I'm not interested and they call back a couple of weeks later. It's to the point now that when I hear this I immediately hang up. This is much worse than the telemarketers I USED to get calls from at home. If you are still interested, then there are literally dozens of magazines that you could look at. You need to be specific about which industry you want (there are many specialty type for things like powders, automotive, T&D, electronic design, etc). The couple I really like are plant engineering and EC&M.
http://www.plantengineering.com/
http://ecmweb.com/
Be careful what you wish for! Once you start these, you will get many others, even if you don't want them (I get about 4 per week). I also get calls weekly from someone wanting to verify my information to send me a free magazine. I tell them I'm not interested and they call back a couple of weeks later. It's to the point now that when I hear this I immediately hang up. This is much worse than the telemarketers I USED to get calls from at home. If you are still interested, then there are literally dozens of magazines that you could look at. You need to be specific about which industry you want (there are many specialty type for things like powders, automotive, T&D, electronic design, etc). The couple I really like are plant engineering and EC&M.
http://www.plantengineering.com/
http://ecmweb.com/
Similar Topics
Just flipped open to the first column of a control engineering-type magazine that showed up in my inbox today (name withheld). Here's how it...
Of the free trade rags I've somehow mysteriously become subscribed to, there are perhaps three, maybe four that are really any good for my areas...
I wanted to do some advertising for my PLC training business but I know there is a lot of trade magazines out there that would be a good fit but I...
I vaguely remember a member saying there's an outfit in the UK that will take trade-ins. Am I recalling that correctly? Looking to go from...
Hi Everyone,
I have been asked to provide a little demo for a local trade show next week.
I have a Panelview + 600 with a Compactlogix L16...
