Ultra High Speed PLC with Analog input
- Thread starter mamo
- Start date
Update on whirlair's Control logix card
It's the Fast analog input 1756 - IF4FXOF2F/B
Samples at 0.3 of a ms AND sends the PLC up to 20 samples at at time
Must use the archiving connection when adding the IO.
1756-td002_-en-e.pdf
Michael
It's the Fast analog input 1756 - IF4FXOF2F/B
Samples at 0.3 of a ms AND sends the PLC up to 20 samples at at time
Must use the archiving connection when adding the IO.
1756-td002_-en-e.pdf
Michael
Similar Topics
Hello everyone. I am working on a rebuilt AB-Ultra series drive (1998) and the firmware for the drive is needed to test and use the drive. I would...
Hi you all!!!
How do i download the backup in a drive ultra 3000 sercos?
I tried to do this through the ultraware software, but it...
So, i've hit the deep end.
customer has a 25 year old machine (not being replaced anytime soon). Its basic operation has a sequence that...
Hello All,
Question about an AB Ultra 3000 servo drive (with DeviceNet), perhaps someone has seen this before...
On power-up, the green LED for...
We are pulling our hair out trying to figure out this issue. We have an AB*MPL-A330P-HK22AA servo motor that started randomly throwing E22 and E24...
