Updating realtime clock TSX Micro

mot

Member
M
Join Date
Sep 2009
Location
Sandton
Posts
22
Hey all, Do anybody know if its possable to update the realtime/system clock of the CPU of a TSX Micro while the PLC is in RUN mode? Will

RRTC(%MW100:4)
WRTC(%MW100:4)

work?
 

Similar Topics

C
FactoryTalk View Studio - Updating from MicroLogix to CompactLogix
Hello, I have a panelview plus that reads from 4 different PLC's. 2 of these used to be Micrologix PLC's and someone else went and updated them to...
Replies
3
Views
120
Jmeadows7676
Jmeadows7676
E
Need help updating E700 firmware from 2.x to 6.x. Have E700v610.bin file.
Good day all! Can someone help me with the procedure to update Beijers E700 firmware? The Panel I am working on is firmware 2.04v and I would...
Replies
1
Views
115
parky
P
Q
Updating IP Gateway of ENBT card in a Redundant Configuration
Hi All, Has any of you tried to change the IP Gateway of the PLC (of course, essentially of the ENBT card), while in a redundant configuration...
Replies
3
Views
150
QasimFSH
Q
D
Updating Firmware on Safety Processor
Is there anything I Should take into account while updating the firmware on a safety processor? I have a 1756-L61S running version 17 and need...
Replies
0
Views
116
Drewster1123
D
B
Updating Panelview 900
Hi, I'm trying to figure out how to properly update the "icons" on my Panelview 900 (AB 2711-T9C9). I think maybe I'm having a fundamental...
Replies
13
Views
1,023
joseph_e2
J
Back
Top Bottom