Hi All,
Has any of you tried to change the IP Gateway of the PLC (of course, essentially of the ENBT card), while in a redundant configuration?
So essentially what we have are two Chassis (one is primary and other is secondary). each chassis has one PLC CPU, two ENBTs and a RM module, and both the RMs (secondary and primary) are connected via fiber.
I want to update the gateway on all 4 ENBTs, but I of course cannot do it just by simply using RSLinx. The way I have figured out so far is to disqualify the syncing, update the Gateway IPs, and the requalify.
Is there any simpler/better way of doing this, please? Also, please note that we cannot afford stopping the PLCs or a full download; so only online changes are the option.
Thanks all!
Has any of you tried to change the IP Gateway of the PLC (of course, essentially of the ENBT card), while in a redundant configuration?
So essentially what we have are two Chassis (one is primary and other is secondary). each chassis has one PLC CPU, two ENBTs and a RM module, and both the RMs (secondary and primary) are connected via fiber.
I want to update the gateway on all 4 ENBTs, but I of course cannot do it just by simply using RSLinx. The way I have figured out so far is to disqualify the syncing, update the Gateway IPs, and the requalify.
Is there any simpler/better way of doing this, please? Also, please note that we cannot afford stopping the PLCs or a full download; so only online changes are the option.
Thanks all!