sampathsietech
Member
Hi All,
I have SLC 5/04 which is already running plant. Now i want upload load the program from that PLC.
i have connected RS232 cable and check Auto Configure, but the message says that
"Failed to find baud and parity “check all the cable and switch settings".
But i have offline program, i saw that channel configuration inside the program
Channel 1 configured - DH+
Channel 0(system) configured - DH485
Channel 0(user) configured - ASCII
Now, please let me know what cable should use to upload the program from SLC 5/04 CPU.
I believe we can use USB to DH485 cable. Please confirm and let me know how to do that.
Thanks in advance for your support.
Best Regards,
Kumar
I have SLC 5/04 which is already running plant. Now i want upload load the program from that PLC.
i have connected RS232 cable and check Auto Configure, but the message says that
"Failed to find baud and parity “check all the cable and switch settings".
But i have offline program, i saw that channel configuration inside the program
Channel 1 configured - DH+
Channel 0(system) configured - DH485
Channel 0(user) configured - ASCII
Now, please let me know what cable should use to upload the program from SLC 5/04 CPU.
I believe we can use USB to DH485 cable. Please confirm and let me know how to do that.
Thanks in advance for your support.
Best Regards,
Kumar