pro_tech204
Member
So i have an allen bradley rack (2080-LC50-24QWB), i have it connected through ethernet.
I dont have an offline program so im trying to upload the program from it.
On RSLINX i see the controller, uploaded the EDS file as well and on BOOTP i set the ip address for that MAC ID based on the IP i see in RSLINX. I could ping the controller and its fine and its not X'd out in RSLINX.
Now in RSLOGIX500 i got to Communications>System Comms and i see my controller when i hit upload i get this error "DiagnosticStatus Failed: 0x10"
I would also like to add that I turned off the controller yesterday and turned it back on today and it has a different IP now which is wierd.
I dont have an offline program so im trying to upload the program from it.
On RSLINX i see the controller, uploaded the EDS file as well and on BOOTP i set the ip address for that MAC ID based on the IP i see in RSLINX. I could ping the controller and its fine and its not X'd out in RSLINX.
Now in RSLOGIX500 i got to Communications>System Comms and i see my controller when i hit upload i get this error "DiagnosticStatus Failed: 0x10"
I would also like to add that I turned off the controller yesterday and turned it back on today and it has a different IP now which is wierd.
Last edited: