User Name:
Member
Hello,
I am attempting to connect to a PLC and the peripherals via USB to ethernet adapter plugged into the unmanaged switch and having issues. I have tried changing my computers IP address to match that of the LAN. I have tried changing the devices IP addresses on the LAN... and nothing. I have even tried using two different adapters, an Insignia and a Dell. I have tried connecting straight to the devices without the switch.
RSLinx Classic and the Banner Safety software refuse to recognize that I am connected to their devices. It is obvious that my configuration is the problem but I have been unable to fix it.
Any thoughts?
User Name:
I am attempting to connect to a PLC and the peripherals via USB to ethernet adapter plugged into the unmanaged switch and having issues. I have tried changing my computers IP address to match that of the LAN. I have tried changing the devices IP addresses on the LAN... and nothing. I have even tried using two different adapters, an Insignia and a Dell. I have tried connecting straight to the devices without the switch.
RSLinx Classic and the Banner Safety software refuse to recognize that I am connected to their devices. It is obvious that my configuration is the problem but I have been unable to fix it.
Any thoughts?
User Name: