Use PLC as OPC client

This is indeed very nice, however I am looking for an industrial equipment that can act as an opc client. A PLC or another gateway device.
Beckhoff PCs look also very interesting however never had prevoious experience.
Do those PCs run windows IR do they come with another OS?

Depends on which series and/or model. They run everything from Windows 7 Embedded, to Win 10 IoT. There is also Beckhoff's proprietary OS - TwinCAT BSD.
 
Red Lion's DA10D protocol converter would work for this. It's small and relatively cheap (I think $500-$600).
 
Last edited:

Similar Topics

The company I work for sells equipment which is controlled by software running on a PC. In cases where the end-user wants to integrate our...
Replies
3
Views
3,107
PLC,GSM/GPRS MODEM AND OPC CLIENT IN ONE DEVICE http://www.plc-gprs-opc.hostoi.com/
Replies
3
Views
1,670
Hi good day Everyone, I have a cimplicity v10 project with 7 to 8k tags communicating with AB PLC through OPC and Rslinx classic. I have this...
Replies
3
Views
225
I hope this isn't an obvious question but can any AB PLC talk OPC such that it could read and write directly to Kepware (or IGS) system tags? OR...
Replies
14
Views
2,677
Hi, I have a multiple PLCs (AB) running multiple applications, inc Motion, on different VLANS, but connected via Stratix5700 (CGN) switches and...
Replies
15
Views
2,436
Back
Top Bottom