Vijeo citect time trigger

sandy5020

Member
Join Date
May 2012
Location
vadodara
Posts
112
Hi,

We have some Actuator valves connected to Schneider PLC via modbus protocol and SCADA vijeo Citect. We need to operate the valve based on time and pressure which will be entered by operator for example

operator enter time as 8 AM and pressure 1.5bar so at 8 am pressure will be maintained at 1.5bar. How can I implement this?

Regards
Sandeep
 

Similar Topics

Hi I have a question. I have a project in SE Vijeo Citect SCADA. I have to compact bool data from PLC into a word. On scada i have a function in...
Replies
4
Views
4,207
Hello, the system we use is Scada 7.5 series. We have usb key activ now we need additional key to make the system work, how do we solve this...
Replies
0
Views
68
My system are taking data from RHT sensors, around 45 points. Now I want to make a function in which, if the data is #BAD or 0 in values for all...
Replies
0
Views
490
I have DI module ICPCon M7024UD connect to my pc using COM3 MODBUS RTU and also RHT sensors are using MODBUS TCPIP.. The problem is, it cannot...
Replies
9
Views
1,689
I need help with vijeo citect 7.4 as I use Modbus TCPIP to get the data, it turns out the address is having error.. For example, when I write...
Replies
2
Views
900
Back
Top Bottom