WAGO 750-554_Siemens S7 Difficulty

[aamfmi]

This is my first time here and also my first time to work with WAGO..I need help badly...I am stuck with this WAGO Device.

I am working with a WAGO Analog Output Module 750-554. The hardware configuration in S7 Manager is complete but I cannot get an output. I made a simple MOVE program in OB1 to check the module's output but cannot get the desired output levels(mAmp) or there is no output at all. I also tried SFC15 but to no avail.

I have tried to contact WAGO but their advice/instructions did not work either.

I hope I can find help here.

aamfmi

 

[Byron]

I'm not familiar with that combination. S7- yes, but not with Wago. I went to Google and typed in these search terms: "WAGO Analog Output Module 750-554 controlled by siemens s7" (without the quotes). There is a lot of information returned. Did you try that? Here is the resulting link: https://www.google.com/search?q=WAG...utput+Module+750-554+controlled+by+siemens+s7

 

[Byron]

You might try uploading some of your work: files; screenshots; links; pdf's to show what you have done and illustrate where you are with the project.

 

[(8{)} ( .)]

Please describe your entire setup. What coupler are you using.

Remember, that if your data is not accessed in the PLC then ProfiBus data does not transfer.

Good luck,

Yosi