wago insertion tool replacement

[ganutenator]

Anyone know of a good screwdriver that works better than the wago insertion tool?

The plastic white one from wago (phoenix?), works the best for me on the terminal strips. But the wago relay bases require a slightly smaller one.

So, the promotional free one from the wago van works for both. Unfort. I can't order these.

The tool from the catalog is too difficult to use.

 

[keithkyll]

Metal okay?
Xcelite R3324 or Wiha.

 

[mbartoli]

Been using one of my Wiha screwdrivers since we lost the freebie tool from Wago.

 

[LadderLogic]

http://www.onlinecomponents.com/wago-210719.html?p=42966793

 

[ganutenator]

That is exactly the one that sucks, Ladder

 

[ganutenator]

just ordered the 2.5mm wiha screwdriver. Will give it a try.

 

[shooter]

you can order the screwdrivers, there are several widths available.
send email with your broken one, and (in netherlands) i receive a new one.
however any screwdriver will work just fine, when the slope is small the screwdriver will stick in the hole.
and different sizes as it will be impossible to open a big(100 mm) terminal witha 1 mm screwdriver.

 

[RussB]

Know anyone who will let you use their grinder or even a Dremel?
Just take it slow and don't let it get too hot.