what is this RLO?
- Thread starter OwwBit
- Start date
RLO stands for Result of Logic Operation. In monitoring Ladder logic, it is the rung status. In STL, it is the value after the instructions you've executed so far; the logical sum of the current instruction and all the instructions prior.
Similar Topics
Hi i have a problem compiling a converted S7300 to ET200SP 1500 Controller
I have one error thats eludes me..
"The RLO is not initialized. Access...
Hello!
I have made connection in TIA portal with an energy analyzer(Carlo Gavazzi EM26-96) using Modbus RTU.
What I am mainly looking for is...
Hello,
We're trying to connect to carlo gavazzi wm14-96 using tia portal. But we couldn't find any gsd file for it. Could you please help?
Thanks
Hi,
I recently had an incident with a program that was written in STL. It went like this:
A M0.0
= Q42.0
A(
AN M6.1
AN M6.2
O M7.0
)
= Q42.1...
dear All,
i am working on the step5 of Siemens. after successful upload program and going online but RLO data is not updating.
In Tset>Status...