Yes it is registered and shown in my controls.
I installed the latest version of Insight Explorer (V4.4.1) and the new active x was automatically registered in the WinCC toolbox.
Charles.
Can you give me some advice on how to set up the FTP server?
I do FTP the imgae across which can be viewed with a browser but with the version of camera I am using only the imaage is shown and not the reference graphics that are shown when using insight explorer.
This is a major PIA and may well make my company throw WinCC Flex in the trash and use a VB or .Net project for the HMI control.
Kindest regards