automat_plc
Member
Hi,
i'm new in Siemens WinCC SCADA softwares,this is my first project, so please few informations...
I have one PC with two LCD - extended desktop, and i have following requirements in WinCC SCADA software:
- two pictures(screens)
- first picture is a "start up" picture
- from this first "start up" picture, via button, opens the
second picture
- first picture must be still open(visible) and set to the
first LCD, and just opened second picture must be placed to
the second LCD, so that the operator has an overview, at the
same time, on both pictures(screens)
Please any advice on how to make these requirements.
Thanks a lot!!!
i'm new in Siemens WinCC SCADA softwares,this is my first project, so please few informations...
I have one PC with two LCD - extended desktop, and i have following requirements in WinCC SCADA software:
- two pictures(screens)
- first picture is a "start up" picture
- from this first "start up" picture, via button, opens the
second picture
- first picture must be still open(visible) and set to the
first LCD, and just opened second picture must be placed to
the second LCD, so that the operator has an overview, at the
same time, on both pictures(screens)
Please any advice on how to make these requirements.
Thanks a lot!!!