Wonderware Intouch communicates with Fuji HMI V8 series

Chopperman

Member
C
Join Date
May 2012
Location
Singapore
Posts
6
Dear all whom knows about Intouch,

My customer asked me the communication possibility between Intouch(Wonderware SCADA) and Fuji V8 series HMI.

I believe that it is possible if Fuji HMI has "Modbus Slave" function and Intouch has "Modbus Master" function.

I have never used Intouch in my life;therefore, it will be very helpful if someone helps me this question.

Best Regards,
Chopperman
 

Similar Topics

P
Wonderware intouch scada
Hi guys, I have experience with PLC to Excel etc...just starting on using intouch scada screens. I have an Excel sheet that uses mainly...
Replies
1
Views
149
NetNathan
N
M
PROBLEMA WONDERWARE INTOUCH V23 Y DASABCIP
Hola chicos. Tengo un problema con el driver de comucicacion dasabcip 5, y un plc controllogix v34, ya realice la comunicacion pero en ciertos...
Replies
2
Views
162
JeffStadnik
J
M
Wonderware Upgrading (from Intouch WindowMaker 9.5 to Intouch WindowMaker 23)
Hi, I am upgrading a Wonderware SCADA form version 9.5 to version 23. I am able to migrate all the graphic, but when to activate the runtime this...
Replies
8
Views
414
MuHaDa15
M
X
Wonderware InTouch v11.1 tag definition OPC UA
Hi all, I am using OI.GATEWAY.2 to communicate to the PLC using an OPC UA. I can see the tags using an OPC explorer connecting to the...
Replies
0
Views
188
xavisole125
X
D
Wonderware InTouch 10.1 Functions ScriptSDK
For a while, I have been working with InTouch 10.1. The problem I am currently facing is the need to implement certain functions that do not...
Replies
0
Views
483
Delorean12DMC
D
Back
Top Bottom