Wonderware Intouch to Janitza MODBUS

KIPeet

Member
K
Join Date
Sep 2008
Location
Russia
Posts
11
Hi all,

How to define item name in Wonderware Intouch to read data from Janitza UMG503 power meter? I use IO Server Modbus. For example address 8000 in UMG503, I use item 'i8000' or 'r8000' or '8000 F' or '8000 S'. It does not work.

How to configure that item.

Thank you
Peet
 

Similar Topics

P
Wonderware intouch scada
Hi guys, I have experience with PLC to Excel etc...just starting on using intouch scada screens. I have an Excel sheet that uses mainly...
Replies
1
Views
156
NetNathan
N
M
PROBLEMA WONDERWARE INTOUCH V23 Y DASABCIP
Hola chicos. Tengo un problema con el driver de comucicacion dasabcip 5, y un plc controllogix v34, ya realice la comunicacion pero en ciertos...
Replies
2
Views
166
JeffStadnik
J
M
Wonderware Upgrading (from Intouch WindowMaker 9.5 to Intouch WindowMaker 23)
Hi, I am upgrading a Wonderware SCADA form version 9.5 to version 23. I am able to migrate all the graphic, but when to activate the runtime this...
Replies
8
Views
428
MuHaDa15
M
X
Wonderware InTouch v11.1 tag definition OPC UA
Hi all, I am using OI.GATEWAY.2 to communicate to the PLC using an OPC UA. I can see the tags using an OPC explorer connecting to the...
Replies
0
Views
195
xavisole125
X
D
Wonderware InTouch 10.1 Functions ScriptSDK
For a while, I have been working with InTouch 10.1. The problem I am currently facing is the need to implement certain functions that do not...
Replies
0
Views
490
Delorean12DMC
D
Back
Top Bottom