Writing to the RTC in Omron PLC

[Steve_D]

HI all, I have a CP1L PLC programmed with Omron CX-one and I need to adjust the internal real time clock externally, i.e get my PLC code to set the current time in the PLC Clock.
Should be just a matter of moving some registers to A35# I would have hoped but its not that easy.

Is this possible??
Thanks in advance

 

[parky]

Only had a quick look but there are clock functions see this manual
Section 3-26

http://www.jwtech.co.th/downloadjwtech/omron/omronmanual/CP1H.pdf