XINJE PLC don't know program a timer

[alendi]

Hi Everyone
can somebody help me with this program (check attachment) to be converted to XINGE XCP PRO? can't program timers or counters, thanks

 

[gerardshaw]

Hi,

inputs are X, outputs are Y, timers are T with a time base of 10mS

you need to change your coils to T4 K50 (5 seconds)

The inputs & outputs are octal (X0 to X7, X10 to X17)

good luck!

 

[alendi]

Thank you

I could make it, is simple but not as AB