Hey everyone it's my first thread here,
i have a XD3-32
yesterday i tested the communication with the PLC by X1 - Y1 i set X1 On, then it worked great.
Today when i wrote a code and i wanna set X1 on it doesn't work.
(PS: M0 / M1 / Y1.... works great)
i have a XD3-32
yesterday i tested the communication with the PLC by X1 - Y1 i set X1 On, then it worked great.
Today when i wrote a code and i wanna set X1 on it doesn't work.
(PS: M0 / M1 / Y1.... works great)