endangs Member E Join Date Aug 2016 Location Jakarta Posts 19 Dec 15, 2016 #1 Dear All, Can XM-123 Aeroderivative Vibration monitor be connected to ControlLogix5000 via ControlNet Communication link ? Regards, Endang S.
Dear All, Can XM-123 Aeroderivative Vibration monitor be connected to ControlLogix5000 via ControlNet Communication link ? Regards, Endang S.
gclshortt Member Join Date Dec 2014 Location Ontario Posts 3,217 Dec 16, 2016 #2 https://www.mc-mc.com/ASSETS/DOCUMENTS/CMS/EN/Rockwell_Automation_Services/rockwell-condition-monitoring.pdf http://literature.rockwellautomation.com/idc/groups/literature/documents/um/gmsi10-um003_-en-p.pdf There is a DeviceNet communication but not a ControlNet on this unit. I would speak with your representative to see if there is an adapter available. Regards,
https://www.mc-mc.com/ASSETS/DOCUMENTS/CMS/EN/Rockwell_Automation_Services/rockwell-condition-monitoring.pdf http://literature.rockwellautomation.com/idc/groups/literature/documents/um/gmsi10-um003_-en-p.pdf There is a DeviceNet communication but not a ControlNet on this unit. I would speak with your representative to see if there is an adapter available. Regards,