Hi Everybody, this may be one for you motion control guys.
We have been tasked with interfacing some Yaskawa drives into a project where the original oem will no longer provide any support of any kind.
Absolutely everything is Knowhow/Password protected
We have 12 Siemens drives which we can just rewrite the software for with no problems, however we have 6 YASKAWA G700 drives that are utilising the embedded "DriveWorksEZ" We believe this controls some motion functions.
the invertors have encoder cards installed but i cant see how to pull data from the encoders into "driveworkEZ)
We have been tasked with interfacing some Yaskawa drives into a project where the original oem will no longer provide any support of any kind.
Absolutely everything is Knowhow/Password protected
We have 12 Siemens drives which we can just rewrite the software for with no problems, however we have 6 YASKAWA G700 drives that are utilising the embedded "DriveWorksEZ" We believe this controls some motion functions.
the invertors have encoder cards installed but i cant see how to pull data from the encoders into "driveworkEZ)