This may very well be my last question. I'm not on to system alarming. Each station has its own set of alarms. What I have done is provide a list of the alarms for each station along with a set of check boxes to set a retentive bit in the local HMI. I was hoping to use this bit to enable/disable notifications with easyaccess. I didn't see an obvious way to do this. Is this possible?
Another option I see that I could use is to enable/disable sending an email to the owner's phone number when there is an alarm and just using easyaccess for remote access.
Another option I see that I could use is to enable/disable sending an email to the owner's phone number when there is an alarm and just using easyaccess for remote access.
Last edited: