Zelio Logic USB-to-COM Driver for Win7(seven) x64

[MGeest]

Just installed and works great, thanks a lot!

 

[ISM]

Maybe i'm the the only one but i can't launch installation...

 

[LMcD]

This is great. How did people survive without the internet and being able to share info?
Thanks to Frelecing

 

[bigvic]

l am also having problems. l have extracted the files to a temp folder, there r 5 files correct ? , if l double click on the dpinst.exe file l get a message , do you want the computer to make the following changes , l click on yes and stuff all happens, l then go to device managers find the usb serial cable in question then to update driver , then browse my computer, then browse the location of the driver files which in this case is the temp folder, l then click on next and immediately get unable to install usb-serial controller. why ??????. I am running window 7 64 bit on a mack that has a windows partition, someone please help !

 

[Frelecing]

l am also having problems. l have extracted the files to a temp folder, there r 5 files correct ? , if l double click on the dpinst.exe file l get a message , do you want the computer to make the following changes , l click on yes and stuff all happens, l then go to device managers find the usb serial cable in question then to update driver , then browse my computer, then browse the location of the driver files which in this case is the temp folder, l then click on next and immediately get unable to install usb-serial controller. why ??????. I am running window 7 64 bit on a mack that has a windows partition, someone please help !

First try unisntalling any driver you have asigned to the cable. Then go to the folder where you unzipped the files, and 2click on dpinst.exe. Follow instructions and it should be done. Check the last post from the 1st page of this thread (one by jasmiller) for more info. Good Luck!

 

[bigvic]

yes l have tried all that, what is suppose to happen when u 2 click on the dpinst.exe file , as mentioned all l get is a message that says do u want the computer to make changes, when l click yes that is all that happens and l do not get any instructions re the driver program,, any more suggestions please,.

 

[bigvic]

l forgot to mention a couple of times l got the message "you have to run the 64bit version of dpinst.exe on this machine".
maybe this is a clue to what maybe wrong.

 

[pieterhimpe]

you are ****ing awesome

 

[mtixente]

i am using windows 7 32 bit, i cant do installation please help. i have try all above but none.

 

[VAFER]

greate thanks, Maaan.

 

[fil244]

Hi:

I just wanted to make a contribution because I've seen a lot of posts in the web regarding this subject.

Here I attach the driver that works for the communication between a Zelio Logic and a Win7 x64 PC with the SR2USB01 cable.

Note that not even in the official Schneider website have support for this, and I spent a lot of time trying to make this works, and finally it did.

Enjoy!

Two year later and your post is the only driver I could find that works. Many thanks, much appreciated. Schneider certainly are in no hurry to support the product.

 

[liviu2004]

I have an issue with Windows 8 x64, error is: "the hash for file is not present in the specified catalogue file. The file is probably corrupt or has been tampered with". Is there any way to go around this?

le: just found a solution, official driver: http://www.schneider-electric.com/d..._V10/?reference=Z2_USB-Driver-W7-64-bits_V1_0

 

[pedrodsb]

just save my day...the driver I want was for x86...

 

[ganutenator]

why does your zip file have an extra .exe file?

 

[litobispo]

@liviu2004,

I can't thank you enough for the info plus the effort. Really great man...