Feel free to ask any PLC RELATED question here. If you know the answer to an existing question, help everyone by posting an
answer.
Enjoy!!!
Hi,
Do you have any trick to make a software working when the 30 days demo version is expired? I've tried to uninstall/clean the registers etc...
Hi, I have a 1214 on ip 192.168.0.100. This is connected to other modules through a switch on same network. I need to connect this to a company...
Hi. I’m trying to upload program from existing PLC S7-1200. Create new project in TIA v15.1 then upload. After upload successfully, go online but...
We normally ground the -24VDC side of a control systems power supply. What are you folks thoughts about grounding the -24VDC side of a class 2...
Hello,
We have two stand alone FactoryTalk Site Edition clients running. Recently we've had a problem with FactoryTalk Linx on one of them. After...
I'm ashamed to admit this but I've never had to replace a battery in a SLC. Some how been able to skip that task in all my years. So yesterday...
Hello there, there's another question for InTouch from me :)
Does anyone know how to configure some usernames and passwords in some database or...
Hello to Everyone all over the world:
I don't want to reinvent the wheel so I am asking others if they have programmed something similar to this...
Hello,
I am new to Codesys, and am trying to learn about it for a project we're developing. I've got a couple questions, but first a little...
I'd like people's opinions on which manufacturer of hardware they prefer. We are an aerospace manufacturing facility that does little to no SCADA...
A couple days ago I accidentally toggled an alwasyoff bit. The issue is it was set up as a single OTU on a rung, nothing else, and used as XICs...
Hi everyone, I'm trying to simulate any program in control expert and see a register in Modscan32 or any software to do that (Like ModbusPoll). I...
We have a SattCon PLC. It looks like a single circuit board with a LCD display and membrane keypad that connects via a ribbon cable to a few I/O...
Hello all- I have a unique challenge using a customers Direct logic 06 PLC. This customer has a DC motor operating at 10 RPM which is turning a...
I want to buy this program if anyone has it. Absolutely no one has it officially for sale.
My cpu is IC610CPU104B
My mail...
Hello Team, I am desperate for some help with an assessment I have as part of a Level 3 general engineering course. I am in a role that is much...
Hello All,
Please one the powerflex 755 Drives looses itds speed reference anytime power-cycle the drive.
Parameter 545 goes to default and must...
i have an device which can support serial (RS485,RS232),CAN protocol . i want to connect it to an existing MIB 1553B bus ,what device will I need...
We have some very old technology in my plant that needs adjusted but I don’t have the equipment. Can anyone tell me what I need to program this IO...
I'm trying to import a .prj file and I keep getting the error message: Project import error. i
Any ideas how to get around this?
Thanks.
Hi PLC Gurus - I am new to the PLC programming and configuration world (coming into the space after several years in the energy management system...
Hello,
I'm working on a machine retrofit project, and am looking for recommendations for HMI/SCADA software. I've used C-More and Horner HMIs...
I am not sure if this is possible but if there is a way, you guys would be the ones to know. I am currently working on a project where we are...
I am converting a SLC 500 to a Compact Logix. I plan on using a Compact Logix 5380 with conversion Kit.
The problem is that the analog input cards...
iFIX 5.5. We have alarm count database tags with SIM driver and I/O address = "C:AREA-SD:ACK" which is suppose to count the acknowledged alarms in...