JulianDave
Member
Our PLC guy at work is MIA, so that is my job now . We have a newer laptop, so I will be buying a 1747-UIC. So assuming I have that and can connect to DH-485:
1. An SLC 5/03 PLC, a Panelview 300 2711-K3A5L1 (DH485 over RS-232) and 2 1761-NET-AIC connected together via their RS-485 ports. A 2711-NC13 goes from the PV to one of the AICs. How do I connect the rest of this up? My guess is a 1761-CBL-PM02 from the 8-pin DIN of one AIC to the RS-232 of the SLC and I plug the 1747-UIC into the DH-485 port on the SLC with a 1747-C13? Would this allow me to program both at the same time?
2. A Micrologix 1500 LSP is connected to a 1761-NET-AIC with a 1761-CBL-AM00 cord and a Panelview 300 2711-K3A5L1 is connected to the AIC with a 2711-NC13. How do I get the laptop in the mix without pulling cords out? Do I have to get another AIC, or is there some way to connect to the RS-485 port on the AIC?
Any help would be appreciated,
Dave
1. An SLC 5/03 PLC, a Panelview 300 2711-K3A5L1 (DH485 over RS-232) and 2 1761-NET-AIC connected together via their RS-485 ports. A 2711-NC13 goes from the PV to one of the AICs. How do I connect the rest of this up? My guess is a 1761-CBL-PM02 from the 8-pin DIN of one AIC to the RS-232 of the SLC and I plug the 1747-UIC into the DH-485 port on the SLC with a 1747-C13? Would this allow me to program both at the same time?
2. A Micrologix 1500 LSP is connected to a 1761-NET-AIC with a 1761-CBL-AM00 cord and a Panelview 300 2711-K3A5L1 is connected to the AIC with a 2711-NC13. How do I get the laptop in the mix without pulling cords out? Do I have to get another AIC, or is there some way to connect to the RS-485 port on the AIC?
Any help would be appreciated,
Dave