sayahan2003
Member
OP
Thanks Chris,
I did the same thing. Please see the attached photo. Even when Quick Client is running, there is no connection!
I did the same thing. Please see the attached photo. Even when Quick Client is running, there is no connection!
OK
lets get Kepware communicating first.
I have kepware on a different machine so I use an IP address, if you haven't already you could try the loop back address of <127.0.0.0> or any actual IP address on the machine.
This is mine:
This works.
Now Kepware will not connect until it has a client, so run the Quick Client and it will connect.